- 60 Hartsdale Rd, Rochester NY 14622
- 7am to 7pm · 7 days a week
- Call an owner: 585 454 8422
A boiler has no filter to change, so nothing ever reminds you it needs servicing. It just sits in the basement running quietly, which is exactly why boilers go years without being looked at. Meanwhile the safety devices are ageing, and those give no warning until the day they are needed. Justin or Colby services it properly and tells you honestly what it needs.
No heat in winter, no cool in a heat wave, busted lines. We answer the phone day or night, weekends included.
A furnace nags you. The filter clogs, the airflow drops, you notice. A boiler has no filter, so there is no built in reminder that anything is due. It just heats, quietly, for years. That is why so many boilers around here have not been properly serviced in a decade, and why the first sign of trouble tends to arrive in January.
What is actually ageing in the meantime is the safety side. The pressure relief valve, the expansion tank, the low water cutoff on a steam system, and the flue. None of those announce a problem. A waterlogged expansion tank quietly drives pressure cycling that wears the whole system. A corroded or blocked flue is a carbon monoxide risk. These are the things a real service checks and the things a quick look misses.
Justin VanCassele and Colby Baker run AmeriHeat together. Colby is a veteran. Both owners are on jobs every week across Rochester and Monroe, Wayne and Ontario Counties.
Give them a call. They actually pick up.
Not a glance and a sticker. Here is what we actually go through on a Canandaigua boiler, gas or oil.
On gas that means checking the flame pattern and the ignition side. On oil it means a new nozzle, a new oil filter, cleaning the CAD cell, and clearing soot out of the combustion chamber. Oil boilers need this far more than gas ones do.
We measure what is actually coming out rather than guessing by eye. That tells us whether the air to fuel ratio is right, which affects efficiency, soot, and carbon monoxide production.
This is the main safety device on the boiler, the thing that prevents an overpressure situation. It has to be confirmed as working, and a valve that has been weeping can scale up and seize. It gets checked every visit.
A waterlogged tank is one of the most common faults we find and one of the least noticed. It causes pressure to swing, makes the relief valve drip, and wears components across the system. We check the air charge against system pressure.
We look for obstruction, corrosion, and whether it is drafting properly. This is the carbon monoxide check, and it is the reason boiler service is a safety job rather than an optional one.
These are what actually move heat to your radiators. A failing circulator or a stuck zone valve is why one part of the house goes cold while the rest is fine. Better found now than in February.
Sediment and scale build up inside older systems and make the boiler work harder for the same heat. We check where the pressure sits and whether the water side needs attention.
We run it through a full cycle, confirm the controls cut in and out where they should, and on a steam system test the low water cutoff. Then you get a straight account of how it is doing.
Boilers have a reputation for being dangerous that is mostly out of date. A boiler with working safety devices cannot explode. That scenario needs multiple protections to be bypassed or neglected into failure, which takes years of nothing being done. The realistic risk in a normal Canandaigua home is much duller and much more common, which is carbon monoxide from a flue that has corroded or become obstructed. That is precisely why the venting check matters more than anything else on the list.
Watch the floor around the boiler. Scale or white crust near the relief valve discharge means it has been leaking past the seat for a while. That is worth a call, because a valve that keeps weeping can scale up and stop working, and it usually points back to an expansion tank that has failed. Small sign, real problem behind it.
If you are on oil, and plenty of properties around Ontario County are, annual service is not optional. Oil burners produce soot, the nozzle wears and changes its spray pattern, the filter loads up, and the CAD cell gets dirty. Skip it and you end up pressing the reset button through January. A lot of Rochester and Finger Lakes companies dropped oil years ago. We never did, which is usually why people out this way end up calling us.
Check the pressure gauge now and then. Most residential boilers sit around twelve to fifteen psi when cold, and a reading that keeps dropping means water is going somewhere. Bleed the radiators at the start of the season if the tops are cool. Look underneath for damp or staining. Keep the area around the boiler clear so it gets the air it needs. Anything involving the burner, the flue, or the relief valve is a job for someone with a combustion analyser.
Due for a service? Call 585 454 8422 or book a tune-up. No plan needed, Justin or Colby will get you on the schedule.
More AmeriHeat services in Canandaigua
Boiler Maintenance in other towns
Honest feedback from real customers. Read every review on our Google profile.
Call the owners directly. A full service, a straight account of how your boiler is doing, and no agreement to sign.
Call, email, or send the form. Not a call center. We will get your Canandaigua boiler serviced properly and tell you straight how it is doing.
