- 60 Hartsdale Rd, Rochester NY 14622
- 7am to 7pm · 7 days a week
- Call an owner: 585 454 8422
No heat in winter, no cool in a heat wave, busted lines. We answer the phone day or night, weekends included.
Farmington has grown fast, and the homes out along the Route 96 and 332 corridors mostly run modern high-efficiency furnaces. Those units are great when they work, but they add parts that older furnaces never had, a condensate line, a pressure switch, a secondary heat exchanger, and those are exactly the parts that leave you with a no-heat lockout. A tech who does not know high-efficiency systems can chase the wrong thing for an hour. We know them, so we find the real cause fast.
We fix gas and high-efficiency furnaces, every brand, not just what we install. Justin or Colby runs the diagnostic, gives you a straight answer and a straight price, and never sells you a part you do not need. Because the owner does the work, the person who figures out the problem is the one who fixes it.
Justin VanCassele and Colby Baker run AmeriHeat together. Colby is a veteran. Both owners are on jobs every week across Rochester and Monroe, Wayne and Ontario Counties.
Give them a call. They actually pick up.
These are the furnace failures we see most often in Farmington homes. We track down the cause and fix it the first time.
A modern furnace that tries to start, then locks itself out, is often a clogged condensate line tripping the pressure switch, a common issue on the high-efficiency units in Farmington's newer homes. We clear the condensate, test the pressure switch, and get it firing again, instead of guessing at the board.
The furnace will not light or throws no heat. Usually a bad igniter, a dirty flame sensor, or a failed control board. We find which one and fix it fast.
The blower runs but the air is not warm. Often a flame sensor, an ignition fault, or a gas supply issue. We find why it is not making heat instead of guessing.
The furnace fires, runs a minute, and shuts off, over and over. Often a dirty filter, a flame sensor, or a pressure switch issue on a high-efficiency unit. It wears the furnace out, so it is worth fixing.
A blower that never runs, never stops, or is loud is usually a capacitor, a motor, or a control board. We test it and tell you exactly what it needs.
A burning smell, a yellow burner flame instead of blue, or a headache when the heat runs can signal a combustion or heat exchanger problem. Shut it off and call us. We check for cracks and carbon monoxide risk.
Most of Farmington's newer homes came with a high-efficiency, or condensing, gas furnace. They squeeze more heat out of the fuel, which is why they save on bills, but they do it by pulling extra heat out of the exhaust until water actually condenses out of it. That water has to drain, and the furnace uses a pressure switch to confirm the venting is clear before it will fire. So on these units, a clogged condensate line or trap, a frozen or blocked vent, or a failing pressure switch will lock the furnace out and leave you with no heat, even though nothing is really broken. Knowing to check those first is half the battle.
A tech who mostly works on older furnaces can spend an hour chasing the wrong part on a high-efficiency unit. We know these systems, so we check the condensate, the pressure switch, and the venting up front, then move to the igniter, flame sensor, and board. That means less time, a smaller bill, and your heat back sooner. When it is a simple clog, we tell you, and we do not turn it into a big repair.
A lot of high-efficiency no-heat calls come down to a clogged condensate drain, which is genuinely a minor fix. We will always tell you when that is all it is.
A furnace burns fuel to make heat, and that makes safety part of every repair. A cracked heat exchanger or a bad combustion setup can leak carbon monoxide, which you cannot see or smell. When we are in your furnace, we look at the things that keep your family safe, not just whether warm air is coming out. If we find something dangerous, we tell you straight and shut it down until it is safe.
Furnace repair starts with knowing what is actually broken. For $99 we come to your Farmington home, run a full diagnostic on the furnace, and tell you exactly what is wrong and what it costs to fix. No guessing, no vague estimates over the phone.
A full diagnostic of your furnace for $99. You get a clear answer and a clear price before any repair work starts. The owner does the diagnosis, so nothing gets lost in translation.
Call the owners directly. Same day service when available, next day at the latest.
Need it looked at? Call 585 454 8422 or request service. Justin or Colby will get you on the schedule.
More AmeriHeat services in Farmington
Furnace Repair in other towns
Honest feedback from real customers. Read every review on our Google profile.
Call the owners directly. We run a real diagnostic, find the actual problem, and give you a straight price before any work starts.
Call, email, or send the form. Justin or Colby answers the phone, not a call center. We will get your Farmington furnace diagnosed and the heat back on.
