- 60 Hartsdale Rd, Rochester NY 14622
- 7am to 7pm · 7 days a week
- Call an owner: 585 454 8422
If your house came with the furnace, somebody else picked it and they picked to a budget. Replacing it is the first time the choice is genuinely yours. The decision that changes how your home actually feels is not the brand on the front, it is whether the thing runs at one speed or several. Justin or Colby will walk you through it.
No heat in winter, no cool in a heat wave, busted lines. We answer the phone day or night, weekends included.
Most furnace conversations get stuck on brand. The more useful question is how the thing modulates. A single stage furnace has one setting, full output, every time it fires. It reaches temperature quickly, shuts off, and repeats. That is what came with most new builds, because it is the cheapest way to meet the requirement.
A two stage unit spends most of the winter on its lower setting and only calls on full output when it is genuinely cold. A modulating one adjusts more finely still. The practical difference is longer, gentler cycles instead of short blasts, which means steadier temperatures room to room, quieter operation, and less starting and stopping wear. It also costs more up front, and on a small well insulated house the gain is modest. We will tell you honestly where your home falls rather than pushing you up the range by default.
Justin VanCassele and Colby Baker run AmeriHeat together. Colby is a veteran. Both owners are on jobs every week across Rochester and Monroe, Wayne and Ontario Counties.
Give them a call. They actually pick up.
Honest version of each, including who should not bother paying up.
One output, full blast, every cycle. Cheapest to buy and it will heat your house perfectly adequately. You get sharper temperature swings, more noise at start up, and more frequent cycling. On a smaller or well insulated home this is often a perfectly sensible choice and we will say so.
Runs on low most of the season and steps up only when it is genuinely cold out. Longer gentler cycles, noticeably steadier temperatures between rooms, quieter, and less start stop wear. For most Victor homes this is where the extra money actually returns something you can feel.
Adjusts output finely rather than in steps, paired with a variable speed blower. The most even comfort available and the quietest. Worth it in a larger house, a home with rooms that never behave, or if you are staying long term. In a compact tight house the gain over two stage is smaller.
Ask us about our current offers when you call. We go over the details at your free estimate, no pressure, no gimmicks.
Putting in a complete new system in your Victor home? Take $2000 off a full installation. Ask us about the details when you call or at your free in-home estimate.
On approved credit. Spread the cost of a new system over two years with no interest. Ask about eligibility when you call or when we do your estimate.
People focus on the heating side and skip past the fan, which is a mistake because the fan is what you live with. A basic furnace has a fixed speed blower that is either off or running hard. A variable speed one starts gently, runs slowly for long stretches, and only ramps when it needs to. That is most of the difference in noise, most of the difference in whether the far bedroom stays even, and it also helps the cooling side in summer by moving air steadily rather than in bursts. If you are choosing between spending on efficiency rating or spending on the blower, the blower is usually the one you notice.
Sizing is not optional in New York. The state energy code requires new heating equipment to be sized using an ACCA Manual J load calculation or an approved equivalent. If a quote arrives with a size on it and nobody measured your house or asked about insulation and windows, that is worth questioning. It matters more than usual in Victor, because a lot of the housing here is newer and reasonably well sealed, so it genuinely needs less furnace than a rule of thumb would suggest.
A better furnace pushed through the wrong ducts will still disappoint. In newer two storey homes the common complaint is an upstairs that never keeps up, and that is usually a distribution problem rather than an equipment one. Not enough return air, long runs to the far bedrooms, undersized branches. A two stage furnace with a variable speed blower will improve it because the longer gentler cycles give the air time to reach where it is going, but it will not cure a duct that was never big enough. We look at that before quoting so you know what the new equipment can and cannot fix.
One visit, one person, start to finish. The owner who quotes your job is the one who installs it, so nothing gets lost between the salesman and the crew.
Most replacements are a single day. Old unit out, new one set, fuel connection made, venting handled, condensate drain sorted where there is one, thermostat wired, then commissioned properly. That last step is where corners get cut. We check the gas pressure, the temperature rise across the heat exchanger, and that everything venting in that basement drafts correctly before we leave.
Want it quoted while there is no rush? Call 585 454 8422 or request an estimate. Justin or Colby will come take a look.
More AmeriHeat services in Victor
Furnace Replacement in other towns
Honest feedback from real customers. Read every review on our Google profile.
Call the owners directly. We size it to your home, go through the tiers honestly, and give you a straight price with no pressure to decide.
Call, email, or send the form. Not a call center. We will come out to your Victor home, size it properly, and give you the straight version.
